Outdoor swing With canopy – Starting with design pieces of slider swing on your work surface. Grouping similar parts will also help organize the project as you go through the steps. Find the seat and arms. Use the screwdriver, screw the arms to the seat, one on each side and turn the same way. Find four swing support struts. These four struts can be the same height depending on the model of the swing. If they are connected to different heights, attach longer pieces to the front of the seat and shorter pieces on the back. Use slices between the arm and the strut. Take two struts on the left side of the seat up and together so that they form a triangle.
Loop hooked spring or chain in the two holes to hold strut together in a triangular shape. Repeat on the right side. Find a Frame. The longest beam in the set is a-frame top. Attach four leg pieces to the top of the a-frame. Use screws and washers to secure your arms. Bolt the side panel or side bar to two left legs. Repeat on the right side. Disconnect sparkler. Back stretching is a slight beam that is going on as long as they beam. Bump it to two rear legs. Match the outdoor swing with canopy frame pieces. These pieces should form a rectangle and bolt in place. Stretch the fabric over the rectangular canopy frame. Start by installing a corner in place and attach the opposite corner. Then, over the frame, put the remaining two corners.
12 Photos Gallery of: Installation for a Glider Outdoor Swing with Canopy
Adjust the fabric so that it is evenly stretched over the frame and smooth from corner to corner. The screw canopy bolt in the sides of the outdoor swing with canopy frame. Turn the bolts in about halfway on each side. Place the canopy over the top of the A-frame so that the bolts on the side align with the holes in the middle of the upper beam. Screw the bolts fully into place. Tilt the canopy to the desired, so the bolts do not let the canopy slip. Hang the seat on U-shaped hooks hanging from the upper beam on the frame. This is a task that can be easier to complete if you have an extra pair of hands. Lift the seat of the chain or spring.